Tin ceiling tiles usually have intricate designs that will beautify your room. You can save money by installing them yourself instead of hiring a professional. If you want to go this route, there are a few things you should know before you begin. This article will give you a few tips for installing tin ceiling tiles.

Size

Tin ceiling tiles come in a variety of sizes. Two of the most common sizes are 2x2 and 2x4. If possible, you should use 2x4 tin ceiling tiles instead of the 2x2 variety. They are cheaper and will provide a better look because there will be fewer seams that are visible. Installation will also be faster with the larger tiles because there will be fewer to install.

Drywall

Some people make the mistake of trying to secure tin ceiling tiles into drywall. This will present a problem because drywall is not strong enough to hold the tiles securely. Instead of trying to secure tin ceiling tiles into drywall, you should use plywood. Plywood that is secured into the studs of your ceiling will be much safer. You also won’t have to worry about leveling each tile individually.

Nails

You should also use certain types of nails when installing tin ceiling tiles. You shouldn’t use flat head nails. Instead of flat head nails, you should use nails with a cone head. These nails will blend in better. They will be less obvious to onlookers because they will appear to be part of the pattern of tin ceiling tiles.

Cutting

It may be necessary to cut some of the tin ceiling tiles in order to make them fit properly. Tin is sharp and will easily cut you while you’re using tin snips. Therefore, you need to make sure you are wearing gloves when cutting tin ceiling tiles. The gloves that you wear should be thick enough to protect your hands from he sharp tin ceiling tiles.

These are a few tips for installing tin ceiling tiles. You should use 2x4 tiles instead of the 2x2 variety because they are cheaper and will take less time to install. You should also avoid trying to secure tin ceiling tiles into drywall because it is not strong enough to hold them. Cone head nails should be used to secure the tiles instead of flat head nails because they will blend in better and appear to be part of the pattern.